User Instruction Manual Induction Cooktop Hob Model: DP-CHEFTOP-1-B Dimensions: 11.4” x 14.56” x 1.61” POWERED BY WWW.DRINKPOD.
Important Safety Instructions When using an electrical appliance, basic safety precautions should always be observed, including the following 1.This appliance is intended to be used for residential and indoor only. 2.To avoid fire or shock hazard, check the voltage indicated on the rating label. Plug in the unit into a correct electrical supply socket that match the conditions on the rating label. 3.Do not use extension cord with this appliance, recommended to use individual electric supply socket. 4.
1.Plug in the AC power cord. The buzzer sound will indicate the induction cooker is now in standby mode. 2.Touch on/off button to power up the induction cooker. Operating Instruction 3.Power : Put the suitable pot or pan onto the inducion cooktop center it over the effective induction perimeter ring. Touch the power button and the unit will begin to operate at factory power preset.Touch the “-” and “+” button to select the desired power setting. The setting will be displayed on the LED screen. 4.Temp.
Packing list Error Guide When the unit has the below problems, it will stop working and along with buzzer sound to warn the user ERROR CODE REASON EO Pot is not suitable E1 A/C voltage is too low E2 A/C voltage is too high SOLUTION parts QTY manual 1 Induction cooker 1 Place a suitable pot Connect the device to correct voltage power outlet Connect the device to correct voltage power outlet Short circuit or open E3 circuit The sensor broken E4 The device requires repair E5 IGBT sensor
