Installation Guide

Installing Your Water 1000 Pro Series
Installing Your Water 1000 Pro Series 2-27
Diagram 2.5.2 Insert Tubing Into Quick Connect Input Port
3. Now pull backwards on tubing, away from attachment,
extending the QC sleeve, and ensuring the connections is ‘locked’.
Diagram 2.5.3 Pull & Lock Quick Connect Connection
4. This will be your ‘Filter Flushing Setup’ that you will save and use every time you
replace your lters. The OUT port is where the water will be ushed out. Optional -
You can cut another piece of tubing (to whatever length you need) if you wish to have
additional line to run wherever you intend to dispense the ushed water into.