Installation Guide

Installing Your Water 1000 Pro Series

Installing Your Water 1000 Pro Series 2-31

Diagram 2.5.10 Connect & Flush Polishing Filter

11. Now push the tubing (running from

Filter Flushing Attachment to

1/4 in. Quick Connect Shuto Valve back into the valve as far as possible. Then,

while using your thumb to keep the QC sleeve fully depressed, gently pull the tubing out

of the port.

Diagram 2.5.11 Disconnecting Filter Flushing Setup From Water Source

12. Be sure to store the your ‘Filter Flushing Setup’ somewhere safe and accessible for

each time you replace your lters.