Installation Guide

Installing Your Water 1000 Pro Series
Installing Your Water 1000 Pro Series 2-47
Remove the bags and top cap.
3. To install, hold the ULTRA+3 Hybrid Scrub in your hand so that its name on the label
is rotated roughly 90 degrees counterclockwise. This (or rotated 180 degrees further) is
the direction each lter should be rotated before beginning to insert it into the mounting
bracket.
Diagram 2.8.3 - Hold Filter Rotated 90 Degrees CCW
4. Next, with your other hand, grab and pivot the lter mount up/back. Continue to hold
and brace it for the next step.
5. Now, insert the lter up into the bracket while twisting clockwise 90 degrees, until you
feel it lock into place.
6. Release the lter and bracket, letting the latter pivot back down to its normal position,
and reattach the magnetic lter door.
Optional - Expanding Purication Capabilities
7. First, grab part
H
Expansion Filter Mounting Bracket, and slide it up into the upper
the rear lter mounting slots on the back of your Drinkpod 1000 Pro Series.