Use and Care Guide

Using Your 1000 Pro Series 11

Using Your 1000 Pro Series

that can be toggled by pressing the

Dispenser Light Button. By default, it is set to

illuminate only when dispensing.

1. To toggle to always illuminate, press

Dispenser Light Button once. Button will

remain illuminated.

2. To toggle to never illuminate, press

Dispenser Light Button again. Button light

will turn o.

3. To toggle back to illuminate only when dispensing, press

Dispenser Light Button one last time. Button will re-illuminate.

Using ECO Mode

Your 1000 Pro Series is equipped with an environmentally aware energy saving feature

called ECO Mode. This feature will power down the heating and cooling systems when

it senses the room’s ambient light has been signicantly reduced. It will power back up the

heating and cooling system once it senses the ambient light levels have returned to their

normal level.

By default, this feature is enabled, which is indicated by the

ECO Mode/Filter Rest Button being illuminated white.

When ECO Mode is active, the

ECO Mode/Filter Rest Button will illuminate green.

1. To disable ECO Mode, simply press and release the

ECO Mode/Filter Rest Button once. The light will turn o.

2. To re-enable ECO Mode, simply press and release the

ECO Mode/Filter Rest Button again. The light will turn back on to white.

Please Note:

Should you experience any issues with ECO Mode engaging at unwanted times, it may be

due to an insucient ambient light levels (when the lights are turned on). To resolve, either

try relocating the appliance to an area that will expose the appliance to higher levels

of ambient light (when the lights are turned on), or disable ECO Mode by pressing

ECO Mode/Filter Rest Button.