Use and Care Guide

Maintaining Your 1000 Pro Series

Maintaining Your 1000 Pro Series 16

6. Slide the blue

DP1

Retainer Clip o of the

Appliance Drain Port.

7. Press the dark gray

DP2

Quick Connect Sleeve all the way up into the port then,

while keeping the sleeve pressed in, pull down and remove the white

DP3

Plug.

8. Now, press and hold the

Dispense Button (with Cold Mode selected) until water

ow from the drain port stops, indicating your 1000 Pro Series has been fully drained.

9. Replug the

Appliance Drain Port by repeating “Step 7” in reverse.

10. Next, if applicable, shuto the

1/4 in. Quick Connect Shuto Valve connected

between your 1000 Pro Series’s

Accessory Output Port and any accessory

appliances (i.e. coee maker) and disconnect the tubing from the port. Placing a towel

underneath your ports will help save time cleaning up drippage.

11. Make any necessary adjustments to your accessory appliances in lieu of them no longer

receiving water (i.e. powering them o in necessary).

DP1

DP2

DP3