Use and Care Manual
Maintaining Your DRINKPOD 1-11
Maintaining Your DRINKPOD
7. Ensure your container is directly below the
V
Appliance Drain Port.
8. Unscrew (CCW) the
DP1
Drain Cap o of the
V
Appliance Drain Port.
ATTENTION, some versions may instead feature a cover held into place by
screws. Simply use a screw driver to unscrew the screws and the cap will pull right o.
DP2
DP1
V
9. Pull out the
DP2
Drain Plug.
10. Now, press and hold the
A
Hot Dispense Button and
C
Cold Dispense Button
until water ow from the drain port stops, indicating your DRINKPOD has been fully
drained.
11. Reinsert the
DP2
Drain Plug into the
V
Appliance Drain Port.
12. Reattach the
DP1
Drain Cap or cover.
13. Next, if applicable, shuto the
C
1/4 in. Quick Connect Shuto Valve connected
between your DRINKPOD’s
L
Ice & Coee Connect Port and any accessory
appliances (i.e. coee maker) and disconnect the tubing from the port. Placing a towel
underneath your ports will help save time cleaning up drippage.
14. Make any necessary adjustments to your accessory appliances in lieu of them no longer
receiving water (i.e. powering them o in necessary).