Installation Guide

Installing Your Drinkpod
Installing Your Drinkpod 2-26
4. Next, remove the Input Port Plug from Source Input Port (see “Diagram 2.7.5” on
page 2-26), using the standard quick connect detach method, as shown below (but
with appliance port and plug, rather than shuto valve and tubing).
Diagram 2.7.4 - How To Detach Quick Connect Tubing
5. Connect the open end of the section of
A
1/4 in. White PP Tubing connected to
your water source to the Source Input Port on the back of your DRINKPOD, as shown.
Diagram 2.7.5 - Connect Source Line To Source Input Port On Your 2-26