Installation Guide

Installing Your Drinkpod
Installing Your Drinkpod 2-29
3. To install, hold the
F1
Chemical Scrub in your hand so that its name on the label is
rotated roughly 90 degrees counterclockwise. This (or rotated 180 degrees further) is
the direction each lter should be rotated before beginning to insert it into the mounting
bracket.
Diagram 2.8.2 - Hold Filter Rotated 90 Degrees CCW
4. Next, with your other hand, grab and pivot the rst (far left) lter bracket up/back.
Continue to hold and brace it for the next step.
Diagram 2.8.3 - Pivot Filter Head