Operating Guide

Step 16
Use scissors or knie
to cut approximately
1’ section o the end
of
A
25’ x 1/4” PVC
tubing at a 90° angle.
Step 18
Firmly pull
outward on both
ends of tubing, to
extend quick-
gripping seals on
shuto valve. Ensure
valve is closed.
Step 17
Connect one end of new tubing section, into one
end of
C
1/4” Shuto Valve, and free end of
A
25’ x 1/4” PVC tubing, into the other end. Firmly
push the tubing into the push-tting until you
cannot push it any further. Some resistance is
normal.
This valve is what
you’ll use to locally
shut o water to your
Drinkpod for tasks
like relocation, or
swapping lters.
16