Specifications

7
ELECTRICAL SPECIFICATIONS AND CAPACITIES/DIMENSIONS
Back View
Vapor Hose Opening
10.000
16.000
5.625
24.000
1½" or 2" Vapor Hose
Connection
24.000
Water Fill
Valve ¼"
NPT
Water Fill
Line Field
Provided
Key-lock
Wall Hanging
Bracket
Wall Mounting
Bracket
(shipped loose)
Electrical
Access Panel
2.000
Alternate water and
electrical access
through floor of unit
Drip Tray Drain
½" NPT
Bottom View
Side View
Top View
OM-218
Figure 8-1: VAPORMIST Unit Dimensions
(All measurements shown in inches.)
2.000
3.312
2.500
2.750
Drip Tray
Drain
Note: For models VM 16, 25, and
34, dispersion tubes will be equipped
with a condensate tube when a hose
kit is used. See pages 4 and 5 for
installation details.
* On 208/240 single phase (3 wire) and 3 phase (4 wire) supplies, the neutral line may be utilized for 120 volt when used in conjunction with SDU fan unit.
** For wire sizing. Highest leg draw is shown due to current unbalance in some cases. All VAPORMISTS operate 50/60 Hz.
VM2 VM4 VM6 VM8 VM10 VM12 VM16* VM25 VM34
Op. Weight 83 lb. 38 kg 83 lb. 38 kg 93 lb. 42 kg 93 lb. 42 kg 93 lb. 42 kg 100 lb. 45.4 kg 100 lb. 45.4 kg
Shp. Weight
78 lb. 35 kg 78 lb. 35 kg 85 lb. 39 kg 85 lb. 39 kg 85 lb. 39 kg 92 lb. 41.7 kg 92 lb. 41.7 kg
AMPS: 120/1
17.0 -- -- -- -- -- -- -- --
*208/1/3 wire 9.6 19.2 28.8 38.5 -- -- -- -- --
*240/1/3 wire
8.3 16.7 25.0 33.3 41.7 -- -- -- --
480/1
4.2 8.3 12.5 16.7 20.8 25.0 33.3 -- --
575/1 -- -- -- -- -- -- -- 43.5 --
208/3/4 wire -- 16.7** 25.0** 33.3** 29.2** 33.3 44.4 -- --
240/3/4 wire
-- 14.4** 21.7** 28.9** 25.3** 28.9 38.5 -- --
480/3 -- 7.2** 10.8** 14.4** 12.7** 14.4 19.2 30.1 40.9
KW 2 4 6 8 10 12 16 25 34
Output/hour/
lb/gal/kg
6/.7/2.7 12/1.4/5.4 18/2.2/8.2 24/2.9/10.9 30/3.6/13.6 36/4.4/16.4 50/6/22.7 75/9.1/34.0 102/12.4/46.2
Table 8-1: Electrical Specifications and Capacities
VM-IOM-1996 Scan.pdf 7 11/19/2009 9:57:23 AM