Specifications

DRI-STEEM CRUV Electric Humidifier Installation, Operation, and Maintenance Manual • Page 43

Replacement parts:

CRUV Humidifier

Table 43-1:

Replacement parts

Item Description Qty Part No. Item Description Qty Part No.

1 Phillips head screw, #8-32 x 1/2" 2 700170-007 15 Hose clamp, 3/4" 4 700560-075

2 Heater terminal cover 1 * 16 Hose, 3/4" ID 1 307020-002

3 Thermo cut-out 1 409560-001 17 Electric valve, 24V 3/4" 1 505400-001

4 Tank cover 1 * 18 Solenoid valve, 24V with ﬂying leads, 1/4" 1 505084

5 Heater element * 409600-* 19 Probe assembly gasket 1 309750-003

Hex nut plated, #8-32 4 700200-002

Probe assembly (CRUV 2-4) 1 406270

Hex nut plated DI, #8-32 6 700200-002 Probe assembly (CRUV 6-34) 1 406275

7 External tooth washer plated, #8 2 700200-003 21 Float switch assembly 1 *

8 LG phillips head bolt, 1/4-20 x 1" 4 700300-013 22 Float assembly 1 505310

9 Lock washer, 1/4" 4 700351-025

Ball valve assembly, 1/2" SST 1 505000-003

10 Cover to tank gasket 1 * End of season drain valve assembly

(not shown) 1 505086-003

11 Probe assembly with conduit and ﬁtting 1 406050-100 24 Seal ring, 1/4" 18 pipe thread 303 SST 1 306365

12 Nylon probe housing 1 308500

Oriﬁce, .041 ﬁll models (CRUV 4-16) 1 160229-041

13 Tank weldment 1 * Oriﬁce, .052 ﬁll models (CRUV 21-34) 1 160229-052

Nut assembly, 1/4"-20 (CRUV 2-4) 4 700650 26 Pipe weld, ﬁll valve 1 160215

Nut assembly, 1/4"-20 (CRUV 6-34) 2 700650 27 Probe assembly gasket 1 309750-004

* Specify humidiﬁer model and serial numbers when ordering replacement parts.

Maintenance