Specifications

Page 40 • DRI-STEEM XT Electrode Steam Humidifier Installation, Operation, and Maintenance Manual
Figure 40-1:
XTSB dimensions
OM-7601
B
A
C
F
D
E
Front Side Back
XTSB-20 shown
Table 40-1:
XTSB dimensions
Dimension
XTSB-20 XTSB-50
inches mm inches mm
A 15.82 402 19.09 485
B 10.86 276 16.06 408
C 12.03 306 14.09 358
D 2.56 65 0.98 25
E 10.97 279 11.73 298
F 3.27 83 2.72 69
mc_091310_1742
Table 40-2:
XTSB specifications
XTSB model
Maximum capacity Shipping weight Operating weight Volume airflow
Current draw at
115V (50/60 Hz)
Input
power
Noise
lbs/hr kg/h lbs kg lbs kg cfm m
3
/min
20 20 9.1 24.0 10.9 20.9 9.5 106 3.0 0.2 A 18 W 49 dBA
50 50 22.7 41.0 18.6 38.1 17.3 665 18.8 0.23 A 23 W 53 dBA
Notes:
• XTSBs ship separately from XT humidifiers.
• Noise measurements taken 6.5’ (2 m) in front of XTSB cabinet.
mc_091310_1743
mc_091410_1106
Dispersion:
XT steam blowers
Installation
The XTSB can be mounted on top of an XT
humidifier cabinet, or wall-mounted remotely
from the humidifier. See Figure 41-2.
XTSB-20, for capacities up to 20 lbs/hr (9.1 kg/h),
can be directly mounted on XT humidifier models
5, 10, and 20.
XTSB-50, for capacities up to 50 lbs/hr
(22.7 kg/h), can be directly mounted on XT
humidifier models 30 and 50.
XTSB installation must comply with governing
codes.
Removing XTSB doors
XT humidifier and XTSB doors have lift-off hinges
for easy removal of open doors. The doors are
captivated when closed but should be removed
when open. An upward bump could damage the
door if it jumps the hinges and falls.