Mason Air AS8800 Low air loss/Alternating pressure mattress Instruction Manual Drive Medical Design & Manufacturing 99 Seaview Boulevard Port Washington, NY 11050 Toll Free: 877-224-0946 Local: 516-998-4600 www.drivemedical.com REV2.12.17.13 526001-5150 V1.2 PLEASE READ ALL INSTRUCTIONS BEFORE USE.
Contents SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS Important Safeguards ……………………………………………………………………………………………………………………….. Introduction Product Description Installation Operation Cleaning Storage ……………………………………………………………………………………………………… 2 3 ………………………………………………………………………………………………………….. 4 ………………………………………………………………………………………………………………………… 7 ………………………………………………………………………………………………………………………….. 9 This product should be grounded.
IMPORTANT SAFEGUARDS 8. TECHNICAL DESCRIPTION READ ALL INSTRUCTIONS BEFORE USING Specifications: Specification Item Power Supply (Note: See rating label on the product) Fuse Rating Cycle time Dimension (L x W x H) Weight AC 120V 50/60 Hz, 0.17A (for 120V system) AC 230V 50/60 Hz, 0.07A (for 230V system) T1A, 250V Four selectable 29.1 x 20 x 11.7 (cm) or 11.4" x 7.9" x 4.6" 2.
1. INTRODUCTION 7. MAINTENANCE This manual should be used for initial set up of the system and for reference purposes. 1.1 GENERAL INFORMATION 7.1 GENERAL 1. Check main power cord and plug if there are abrasions or excessive wears. The system is a high quality and affordable mattress system suitable for stage I, II, III, bed sore treatment and prevention of pressure ulcers. 2. Check mattress cover for signs of wear or damage. Ensure mattress cover and tubes are stubbed together correctly.
. CLEANING 2. PRODUCT DESCRIPTION It is important to follow the cleaning procedures before using the machine on human bodies; 2.1 PUMP AND MATTRESS SYSTEM otherwise, patients and/or doctors may have the possibility of getting infection. By wiping the pump unit with a damp cloth pre-soaked with a mild detergent, and keep it away from dust. If other detergent is used, choose one that will have no chemical effects on the surface of the plastic case of the pump unit.
2.2 PUMP UNIT 4.3 PRESSURE SET UP Users can adjust pressure of air mattress to a desired softness by adjusting the comfort keys 2 by weight. Please consult your physician for a suitable setting. Front 1 1. Quick Connectors Patient can lie on the mattress after the pump is running under the alternating mode, this indicates 2. Front Panel the pressure is reached to the desired softness.
4. OPERATION 2. Cycle Time There are four selectable cycle times found from the touch panel area. By pressing (icon) sign, NOTE: Always read the operating instruction before use. 4.1 GENERAL OPERATION user can select four different cycle times for best comfort. 3. Therapy. A. Autofirm 1. Switch on the main power switch found from the side of the pump. This mode will be forced to execute every time the power switch is turned on. This insures the pump is able to reach its maximum operating pressure.
4. Plug the power cord into electrical outlet. 6. Service This feature will lit during mechanical failure situation. User can notify the technician for repair. NOTE: 1. Make sure the pump unit is suitable for the local power voltage. 3. INSTALLATION 2. The plug is also served to disconnect the device. Unpacking the box to inspect for any damage, which may have occurred during shipment. If there NOTE:1. S’assure que la pompe est compatible are any damages, please contact your dealer immediately.