Owner`s manual

15
5. OPERATION
Warning

When on a gradient NEVER switch the power chair to the freewheel mode. The
electromagnetic brakes will not be applied and this may result in injury.
HOW TO ADJUST THE SEAT
To adjust the seatback angle
Pull up the seatback release lever.
Move the seatback down or up to the desired position .
Release the seatback release lever.
To adjust the armrest width
Loosen the knobs
Slide the armrests in or out to the desired width .
Tighten the knobs.
To adjust the armrests angle
Lift-up the armrest.
Loosen the nut.
Adjust the socket screw up or down to the desired arm angle position.
Tighten the jam nut
To determine the same angle for the opposite armrest, count the exposed threads after the jams nut
has been tightened.
If necessary, repeat the steps for the opposite armrest.
Seatback Release Lever
Knob Jam Nut