Owner`s manual

13
5 . O P E R AT I O N
Warning!
When on a gradient, NEVER switch the power wheelchair to the freewheel mode.
The electromagnetic brakes will not be applied and this may result in injury.
HOW TO ADJUST THE SEAT
To adjust the seatback angle
Pull up the seatback release lever.
Move the seatback down or up to the desired position .
Release the seatback release lever.
To adjust the armrest width
Loosen the knobs
Slide the armrests in or out to the desired width .
Tighten the knobs.
To adjust the armrests angle
Lift-up the armrest.
Loose the jam nut.
Adjust the socket screw up or down to the desired arm angle position.
Tighten the jam nut
To determine the same angle for the opposite armrest, count the exposed threads
after the jam nut has been tightened.
If necessary, repeat the steps for the opposite armrest.
Seatback Release Lever
Jam Nut
Knob