Data Sheet

© MSW Motion Control GmbH Vertriebsgesellschaft Page 1 of 4
Linear actuator DSZY35 (of stainless stell)
Stainless steel electric linear actuators are required in a wide variety of
applications. The electric linear actuator DSZY35 is made of stainless
steel. It is available in the model:
DSZY35-HS2
(with 2-channel Hall sensor for incremental position feedback)
Equipped with a trapezoidal screw (ACME screw) it is small, compact
and lightweight DC linear actuator.
With the help of an integrated diode circuit, a fast reversal of direction is
achieved by simple voltage reversal of the DC motor.
The DSZY35 does not have integrated limit switches.
Overloading of the drive can be prevented by separate monitoring and
limiting of the current.
Type code (all options can be combined)
Optional
DSZY35 - 12 - 19 - 200 -
HS2
- IP69K - C 1 1
Type Input
voltage
12 Vdc
24 Vdc
Gear
reduction i
19
27
43
Stroke
50 mm
100 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
Version
2-channel
Hall sensor
IP Code Front
connector
(piston rod)
1 = massive
2 = Standard
Rear
connector
(gear cover)
1 = Standard
2 = clevis
Performance data: Load – Speed – Current
Gear
reduction i
Dynamic
Load
(N)
Static
load
(N)
Typical speed *
(mm/s)
Typical current *
(A)
minimum
load
maximum
load
minimum load maximum load
12 Vdc 24 Vdc 12 Vdc 24 Vdc
19 600 1,800 17.4 11.7 0.5 0.25 3.6 1.8
27 1,000 1,800 12.3 8.0 0.5 0.25 3.6 1.8
43 1,500 1,800 7.5 5.0 0.5 0.25 3.6 1.8
Load – Speed – Diagram * Load – Current – Diagram *
(*) Average values