Datasheet

© Copyright by Drive-System Europe Ltd. Stand: 16.10.2015
Dimension
Linear actuator
Length
Ma
ss
in mm
Stroke ± 3mm 25 50 100 150 200 250 300
DSZY1 - type standard
A
128 158 209 260 311 362 413
B
153 208 309 410 511 612 713
Gea
C1x – is standard
Options: C2x or C3x
Attention:
By C3x - the dimension A and B lengthens itself
about +41mm
Mounting für actuator
Clamp: DSZY1-H01
Mounting Bracket: DSZY1-H02
Please additionally order .
Mounting instruction
Please make sure, that load is not bigger than shown in the diagram speed/load. If overload is possible in the application,
please use a separate current control to switch off at too high current ( = too high load ). Nominal current, depending on
ratio, is shown in the diagram current / load.
Please use the right voltage supply as it is shown on the actuator. For extending the piston rod connect the red cable with
plus and the black cable with minus. Movement is stopped automatically at the end of the stroke. For moving back,
reverse the polarity (change plus and minus). Endswitches are not adjustable by themselves.
Load should be centered in moving direction, shear forces should be avoid because of shortening the lifetime. Big shear
forces can destroy the actuator! Be carefull.
Drive-System Europe Ltd.
www.drive-system.com
[e-mail]