Product Manual

1. Place the pump on a flat surface or suspend
pump on end of bed with attached hook.
2. Place the mattress on top of bed mattress.
Note foot end.
3. Connect air hoses to pump and mattress.
4. Check and ensure the air hoses are not
kinked or tucked under mattress.
5. Turn pressure to firm. Plug the
power cord into outlet. Switch on the
pump. The green switch will light when
unit is operating.
6. Adjust pressure for patient comfort
DANGER:
DO NOT use in the presence of flammable
anesthetic:
It may cause possible explosive hazard.
CAUTION:
Risk electric shock. DO NOT remove cover (or
back). Refer to your qualified service personal
for assistance.
Your Drive brand product is warranted to be free
of defects in materials and workmanship for one
year of the original consumer purchaser.
This device was built to exacting standards and
carefully inspected prior to shipment. This 1 year
Limited Warranty is an expression of our confi-
dence in the materials and workmanship of our
products and our assurance to the consumer of
years of dependable service.
In the event of a defect covered by this war-
ranty, we will, at our option, repair or replace the
device.
This warranty does not cover device failure due
to owner misuse or negligence, or normal wear
and tear. The warranty does not extend to non-
durable components, such as rubber accessories,
casters, and grips, which are subject to normal
wear and need periodic replacement.
If you have a question about your Drive device or
this warranty, please contact an authorized Drive
dealer.
1 year limited
warranty
© 2006 Medical Depot, Inc. All rights reserved.
Drive is a trademark of Medical Depot, Inc.
Port Washington N.Y. 11050 USA Made in China
operating instructions