Product Manual

assembly instructions for low bed

1. Lay bed down on all four casters

2. Place the long mounting bracket (C) on the head board (D) (the larger of the

two wood panels).

3. Place head board (D) into the slots on the head section of the bed spring.

Place long bolts and tighten to secure.

4. Assemble the foot board by aaching the two angled mounting brackets (E) to

the foot board (F) (the smaller of the two wood panels)

5. Rest footboard on foot section of bed

6. Align the holes in the mounting bracket with the holes in the foot spring section

and aach using four bolts.

7. If manual bed crank bed up several inches. If electric use Hilo buon to raise bed

several inches.