Product Manual

PACKAGING/HANDLING INSPECTION
INSPECTION OF ALL COMPONENTS Inspect – Receipt of shipment
1. Check bed components for obvious damage.
2. Inspect power supply cord for cuts and/or damage.
3. Check that the actuator cords are connected properly into the control box.
ASSEMBLY INSPECTION-MECHANICAL
SLEEPING SURFACE, FRAME AND BASE ASSEMBLIES Inspect – 1 Year
1. Inspect welds on the sleeping surface, frame and base assemblies for
stress fractures.
2. Inspect all fasteners for wear and looseness.
HEAD/FOOT AND HI/LO ACTUATOR/PULL TUBES Inspect – 1 Year
1. Inspect head, foot and hi/lo torque tube components for excessive wear.
2. Inspect head, foot and hi/lo torque tubes for bends, wear or stress damage.
Clevis pins on head, hi/lo pull tubes should not be bent.
2. Tighten all actuator mounting hardware.
CASTERS Inspect – 1 Year
1. Check locks on both locking casters to ensure they are operational.
2. Check casters to ensure they roll properly.
1
inspection maintenance plan