Product Manual
F
B
A
C
D
E
G
9
assembly instructions for long term care beds
1. Open carton and check to make sure all parts are there and not damaged.
2. Lay bed spring (A) on one of its sides.
3. Place casters (B) in all four legs. Tilt frame slightly to put the casters on when working on
the floor side.
4. Lay bed down on all four casters
5. Place the long mounting bracket (C) on the head board (D) (the larger of the two wood
panels).
6. Place head board (D) into the slots on the head section of the bed spring.
Place long bolts and tighten to secure.
7. Assemble the foot board by aaching the two angled mounting brackets (E) to the foot
board (F) (the smaller of the two wood panels)
8. Rest footboard on foot section of bed
9. Align the holes in the mounting bracket with the holes in the foot spring section and
aach using four bolts.
10. If manual bed crank bed up several inches. If electric use Hilo buon to raise bed
several inches.
11. Aach the four resting legs (G) on the four plates on both sides of bed.
12. If side rails are present mount the cross bar in the desired position using the holes on the
bed spring frame (make sure you have proper clearance from side to side as rails moves
in a side ways motion.)
13. Slide side rail over the cross bar and tighten nut.
MANUAL & ELECTRIC LTC BEDS