Product Manual

assembly instructions
1. Remove contents from carton.
2. Straighten the tiller to the upright position. Slide
locking mechanism to the side to allow tiller to reach
full upright position. Release locking mechanism to
lock tiller in position
3. Slide locking mechanism into groove on tiller, depress
locking handle to secure tiller lock.
4. Insert pad post into receptacle on frame. Secure
pad in place by inserting locking pin into hole. Lock
pin in place by sliding retainer tab into position.
1
2
6. Aach basket by sliding basket receptacles down
over hooks on the front of the tiller.
5. Lock pad in position using locking lever