Product Manual

322
Terms, Abbreviations & Symbols
This guide and the SmartDoseMini+ Gas Conserver product labeling
uses the following terms, abbreviations and symbols:
Important Safeguards
When using oxygen products, especially when children are present,
basic safety precautions should always be followed. Read all instructions
before using. Important information is highlighted by these terms:
Important safeguards are indicated through this guide; pay special
attention to all safety information. Read all instructions before using.
Save these instructions.
WARNING Important safety information for hazards
that might cause serious injury.
CAUTION Information for preventing damage to
the product.
IEC Symbols
Smoking is not
allowed in the area
REF
Indicates a
Model Number
General
warning sign
SN
Indicates a
Serial Number
Class II
Equipment
IXP1
Drip Proof
Type B
Equipment
Follow Operating
Instructions
Warning:
dangerous voltage
Fire
Hazard
On/Adjust
DANGER Urgent safety information for hazards
that will cause serious injury or death.
NOTE Information to which you should pay
special attention.
FCC Statement
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy a
nd, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct
the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced technician for help.