Product Manual

5. CLEANING AND MAINTENANCE

IMPORTANT: Do not leave water in the water tank when unit is not in use as it may result

in the buildup of mineral deposits and bacteria that can inhibit performance eciency and

operational longevity of the humidier. If water remains in the water tank for extended

periods, bacterial growth is possible.

Daily Maintenance

4. OPERATION

1. Place the humidier body horizontally at a suitable place.

2. Remove the top by lifting straight up, and overturn the water tank. Screw

o the tank cover, and pour in cooled water. Distilled water is recommended

for best results. Replace the tank cover tightly to avoid leakage, and reposition

the water tank back onto the base of the humidier.

3. Connect the unit to power supply, turn on the power switch and the

humidifying indicator lights will be illuminated.

4. There is no automatic adjustment of humidifying output, which is set to the

dryness of your room.

5. When there is no water in the water tank, the built-in safety device will

disconnect the atomization circuit automatically. The output from the spray

nozzle will stop and the water depletion indicator will illuminate (two colors

of the same indicator). To continue the operation, turn o the humidier

and unplug the unit. Add water into the water tank, and reassemble the

water tank and humidier body. Plug the humidier back in and set to

desired mist output.

1. Always turn o and unplug the humidier from the outlet before cleaning.

2. Empty water from the water tank and water basin daily.

3. Wipe and dry water basin with a clean, dry cloth or paper towel.

4. Replace the water tank.

It is important to keep your ultrasonic cool mist humidiers clean. Cleaning

and disinfecting on a regular basis is important for maintaining the performance

of your humidier.