Product Manual

folding and transporting

Note: The folding procedure is essentially the assembly procedure

in reverse.

1. Press the release paddle on the

half fold back mechanism with

your thumb whilst lightly pulling

the push handle down

2. Pull the armrest release buon whilst pulling up on the armrest to

release. Flip the armrest back until they are hanging vertically down

from the chair.

3. Flip up the footplates and li up the footplate receivers. Press

the brass push buon and push the footplate back whilst rotating

approximately 90º until it locates in the receiver hole nearest

the chair.

4. Li the chair by the two li up straps and the chair should naturally

fold up. The chair can be carried using the li up straps.

5. If required, unzip the carry bag and insert the chair. If necessary

rotate the front castors to allow the chair to ﬁt in the bag. Zip up the

bag and carry using the two handles.

The Travelite is not suitable for use a seat in a motor vehicle.

Users should always transfer to the vehicle’s seat.