Specifications

drobo.com | Getting Started Guide for Your Drobo / Pro / S |
27
8. In the IP Address text box, enter a unique IP address for your DrobPro.
9. If needed, also modify the address in the Subnet Mask text box.
10. When finished, click the OK button.
The Confirm Restart dialog box appears, asking to restart your Drobo device in
order to apply your setting changes.
11. Click the Yes button.
After your Drobo device restarts with your new settings, it displays on the Capacity
and Tools page in Drobo Dashboard.
12. Now safely shut down your DroboPro. For steps, see “Safely Shutting Down Your
Drobo/Pro/S” on page 32.
13. Unplug the USB cable from your DroboPro and computer.
14. Plug one end of the Ethernet cable to the iSCSI (Ethernet) port on your DroboPro,
and plug the other end into your Ethernet port on your switch.
15. Press the power toggle button on the back of your Drobo device once.
Your DroboPro powers on. You are ready to manage and use your Drobo device.
See “Where to Go from Here” on page 31.
Note: You can re pe at t he se s teps for each Dro bo Pr o yo u wo uld like to add t o yo ur s wi tc h.