Specifications

drobo.com | Getting Started Guide for Your Drobo / Pro / S |
29
6. To man ua lly as sig n an IP add re ss, fr om th e Navigation menu at the left, click the
Settings option, and then click Network.
The Network (iSCSI) Settings page appears.
7. Select the Manually Assign an IP address option button.
8. In the IP Address text box, enter a unique IP address for your DrobPro.
Note: Be sure to use an IP address that is outside the range of IP addresses your
router might assign with DHCP (Dynamic Host Configuration Protocol). Check the
documentation for your router for more information.
9. If needed, also modify the address in the Subnet Mask text box.
10. When finished, click the OK button.
The Confirm Restart dialog box appears, asking to restart your Drobo device in
order to apply your setting changes.