Instructions

SKU:2001710003
JS-C33 General Programmable Battery Power Display
SUMMARY:
This product is a general instrument, adopts LCD color screen,
can long-term display the battery, voltage, temperature (Selective
FEATURES:
The patented product adopted neutral packaging production,
with simple dustproof waterproof surface, with full protection
cover.
PARAMETER：
Parameter
Min
Max
Unit
Figure
Product size
mm
61.5*33.5*13.5
Installation size
mm
58.5*28.5
Display size
mm
36*19.5
Weight
20
21
22
g
Working voltage
10 100
V
Common
Working consumption
5
6
mA
LED ON
Voltage accuracy
±0.1
±0.5
%
Temperature accuracy
±0.5
±1
℃
Selective assembly
Sleep consumption
6 10
12
uA
20V
Buzzer volume
70
75
80
db
Selective assembly
Working temperature
-10
25
55
℃
Buzzer voltage
adjustable
V
100 11.5
Typical
INSTRUCTIONS:
1. PH2.0 terminal conductor, connected to PCB opposite connector
Switch volt or
temperature
display
ON/OFF
P 1
Go into programming mode:
1.Power-on status, press last about
5 seconds, enter the main menu, as
shown in Figure P2.
2.The main menu has 5 sub menus:
1--, 2--, 3--, 4--, 5--.
3.Press , and the 5 submenu loops.
4.Each function of the 5 sub menu：
1- -: Select built-in preset battery specification: lithium battery, lead
acid battery, LFP battery.
2- -: Setting Delay Time Delay OFF/ON, and select Delay Time
3- -: The voltage of percentage 0 to 100 could be customed.
4- -: Buzzer switch and alarm value setting.
5- -: Calibrate the instrument voltage again.
5.Press , select the menu to enter, long press to quit.
6.All parameters are subject to the last save.
P 2
Submenu functions explanation:
1- -: Quick change battery type
Under this menu, you can change the default parameters speedy:
L represents the lithium battery, and the latter figure is the series
quantity;
assembly; sound-light alarm (Selective assembly) can be used in
a variety of lighting conditions. The default parameters are suitable
for lithium batteries, lead-acid batteries, lithium iron phosphate
battery, Ni MH battery application field; through the development of
programming, can be applied to any battery, simple wiring, convenient
maintenance and disassembly using standard connector.
To display the percentage of remaining battery power, voltage,
temperature.
The 10~100V wide input voltage, reverse protection.
The product can go to sleep after 10 seconds.
The red indicator flashes to alarm when it is low battery.
The installation is simple, with a buckle, without screws.
The buzzer alarm switch,
alarm voltage setting
(Selective assembly).
The real-time detection
of the battery temperature
(Selective assembly).
Open programming mode
The color liquid crystal material, clear display, display softly at
night.
To customize the type of battery, suitable for lead-acid, lithium-
ion batteries, lithium iron phosphate, metal hydride battery, etc.
2. External NTC temperature sensor, please put the sensor to measure
the temperature of the parts, do not squeeze the sensor (selective
assembly).
3. Red line to the positive terminal, black line to the negative terminal.
4. After the instrument is powered on, it shows the percentage of the
battery power, the voltage, and battery icon.
5. Press to turn off the instrument. In close status, you can wake
up the instrument by pressing any button.
6. Press in the working status, you can switch the voltage and
temperature to display.
7. The battery icon on the display interface, from the right to the left,
are 7 display boxes representing the battery power from low to high.
8. The voltage on the display interface is measured in real time, and
the voltage value is displayed on 10-100V.
9. The percentage on the display interface is the percentage of the
remaining battery power.
10. When the battery is connected to the charger or the discharge
of the large current load, the display parameters will fluctuate
11. The red lightning flashes the alarm when the battery is low
12. Low voltage buzzer alarm (Selective assembly)
13. If the battery specification is special, you can enter the programmable
mode 3-- and reset the upper and lower limits of the battery.
F represents the lithium iron phosphate battery, and the latter figure
is the series quantity;
B+ B-
-
+
Battery
red wire
black wire