Use and Care Manual

Escape 1400 Insert Installation and Operation Manual
48
Insert the superimposed brackets (G)
and (H) with the screws (F) in the groove
of each decorative trim (I), (J) and (K).
Align the corners of the angled side of
each trim, and then tighten the screws
(F) to secure the trims.
Align the trim assembly (L) with the left
and right edge of the faceplate and
slowly slide it down over the faceplate.
Secure the trim to the faceplate by
squeezing the eight trim retainers (M)
between the inner edge of the trim and
the front of the faceplate. As in the
image on the left.