Technical data

Page 15 of 23
Facing (cont’d)
3. Push the facing towards the
structure of the fireplace. (Push
in aligned with clips).
 Install the control knob on the
flow regulating rod.
NOTE :
The facing must lean evenly on the
fireplace structure and finished front
wall.
4. Hook up the top and bottom
louvers:
 The top louver sits on (4) hooks.
 The bottom louver slides in (2) pins.
 The bottom louver is used as an
access panel. Tip it towards you to
have access to the fan rheostat,
cleaning tee and the carburetor
(valve).
5. Install the small polished brass
handle using (1) bolt and (1) nut
provided in the hardware
package.
Figure 22 : Fireplace facing