Technical data

Page 16 of 23
OPERATION INSTRUCTIONS
Combustible
• Your stove has been designed to work with oil #1 or #2. DO NOT USE GASOLINE, CRANKCASE OIL
OR ANY OIL CONTAINING GASOLINE. Drolet Stoves & Fireplaces declines all responsibility
regarding damage cause by using other combustibles.
• Make sure to use oil without impurities which may plug filters and valve’s orifice. Impurities only give an
improper combustion.
Lighting
BEFORE LIGHTING
• make sure that :
 The tank is full;
 The isolating valve is open;
• See that the ring is in the right position.(figure
23).
• Make sure that the flow regulating handle is in
the « 0 » position (figure 24).
• If it’s not already done, arm down the valve’s
lever located behind the stove (figure 25).
• Wait for the valve to fill up and let the level
stabilize.
BEFORE ATTEMPTING TO LIGHT YOUR
STOVE, MAKE SURE THAT THE FLOW
REGULATING HANDLE IS IN THE 0 POSITION.
Figure 23 : Burner, ring and catalyst
Figure 24 : Constant level flow control
valve (carburetor)
Figure 25 : Arming / dearming flow control
valve (carburetor)..
ATTENTION: DUE TO HIGH SURFACE TEMPERATURE, KEEP CHILDREN, CLOTHING AND
FURNITURE AWAY