Technical data

Page 7 of 23
Leveling the fireplace
Figure 11 : Levelling the burner
• Now that your fireplace is installed into place, you have to level the burner.
• Put the level in the middle of the burner parallel to the door. (See figure 11-a). Screw or unscrew the
adjustable legs until perfect level has been reached. Use a 7/16’’ (10 mm) key.
• Then put the level in the middle of the burner so that it is parallel to the sides (See figure 11-b). Screw
or unscrew the adjustable legs until perfect level has been reached. Use a 7/16’’ (10 mm) key.
IMPORTANT :
IT IS VERY IMPORTANT TO LEVEL THE BURNER TO ALLOW A PROPER OIL VAPOR
DISTRIBUTION THROUGHT THE RING AND THE CATALYTIC CONVERTER.