Owner`s manual

Typical installation through the ceiling

FIGURE 2.2.1 (B) Typical Installation Through the Ceiling

1. Place your stove where you would like it located and use a plumb line to mark the

ceiling directly above your stove flue. You will probably have to adjust this position

slightly to ensure that your chimney will run between the joists. You can use a stud

finder to locate the joists. You also need to take into account the minimum

clearances to combustible materials. After you have determined where the

chimney will go through the ceiling, use a spoke saw or power jig saw to cut a hole,

remembering that you need a minimum 2-inch clearance between the chimney and

any combustible materials. Depending on whether you have a one or two story

structure, you will need to cut a matching hole through the floor of the attic or

second floor living space.