Specifications

Rocket Installation and Operation Manual

When using the optional fan, allow the stove to reach operating temperature

(approximately one hour), before turning it on. The increased airflow from the fan cools the

firebox and could affect the start-up combustion efficiency if the fan is turned on too early.

You can also install a thermodisc to enable the blower to start or stop automatically when

the stove is hot or too cold. The thermodisc part number is AC05530 for a basic model and

ACO2055 for a quick connect model.

Installation instructions are supplied with the fan and the thermodisc kit.



CAUTION: ENSURE THAT THE FAN’S POWER CORD IS NOT IN CONTACT WITH

ANY SURFACE OF THE STOVE TO PREVENT ELECTRICAL SHOCK OR FIRE

DAMAGE. DO NOT RUN THE POWER CORD BENEATH THE STOVE.