User manual Telphone Ominus FPV

6
3. Open the FPVCam app. Push the
“+” in the upper right corner to
add the camera. Wait for about 30
seconds for phone and camera
Wi-Fi to sync. If no camera found,
hit refresh
. If the camera
doesn’t show up, you may have
to go your WiFi settings to make
the connection. The password is
1234567890.
4. Once found, push the
Add Button. The camera
will connect and the live
video will display.
5. Live feed is now active.
1. Install the “FPVCAM” app from
Google Play (Android
®
).
2. Turn on the transmitter and plug
in the battery for the Ominus FPV.
Be sure to fly in a safe environment and respect
the privacy of others. Android
™
and Google Play are
trademarks of Google Inc.
Wi-Fi
®
is a registered trademark of the Wi-Fi Alliance.
ANDROID PHONE SETUP
1. To activate the “record” function, simply push and release the Video
On/Picture Button on the back/right hand side of the controller.
2. While recording, you can take a still photo. Push and hold the Video
On/Picture Button for 2 seconds.
3. To stop recording video push the Video Off Button on the back/left
hand side of the controller. You must stop recording video before
unplugging the quadcopter battery or your video will be lost.
4. Once you are finished recording video or photos, tap anywhere on the
screen to access the app controls. Tap the download button from the
right hand side of the screen. To review the video you just took, use
the slider at the bottom to step back to different places in the video.
NOTE: The quad must still be plugged in for this to work.
NOTE: You can also take pictures and stop/start videos directly
from the app. Access the controls by tapping on the screen.
FPV VIDEO RECORDING/PICTURES
PUSH & RELEASE
PUSH & RELEASE
PUSH & RELEA
PUSH & RELEASE
STARTS
RECORD
STOPS
RECORD