BEFORE FLYING, PLEASE READ & UNDERSTAND THESE INSTRUCTIONS! and go to www.knowbeforeyoufly.org Radio Controlled Quadcopter Spare Blades (2 black, 2 color) Dromida XL Quadcopter Battery Charger Controller Screwdriver AAA Batteries (4) AC Adapter Flight Battery Prop Guards (4) Camera with Memory Card DIDE06 Only TO PREVENT MOTOR DAMAGE ALWAYS BE SURE THE THROTTLE IS OFF WHEN THE BLADES ARE OBSTRUCTED OR CONTROL IS LOST. 1 Use the left stick to arm the transmitter.
CHARGING 3. Arm the transmitter by moving the throttle stick to full throttle and then down to low throttle. The transmitter will beep once, confirming that it is now armed. Plug the AC wall adapter into a 120V outlet and connect the balance charger to the wall adapter. The power LED will illuminate solid RED. Plug the white balance plug on the battery to the 2S port on the charger. When charging, the charge status LED will illuminate solid RED. When charge is complete the LED will change to solid GREEN.
FLIPS The Dromida XL is equipped with a flipping function that will enable you to flip the quadcopter with the press of a button. Your first flips should be done at higher altitudes of at least 30-40 feet (9-12 meters) so you can become familiar with how the quad reacts. Be sure the Dromida XL has plenty of room to flip. The area should be completely free of buildings, trees, poles, etc. as well as any spectators, and especially you, the pilot. 2.
LOW BATTERY INDICATOR RECORDING VIDEO & PICTURES WITHOUT THE APP The LEDs on the Dromida XL will flash slowly when the LiPo battery voltage is low. Thirty seconds after the lights begin to flash the Dromida XL will begin the auto-land procedure. Always unplug the battery after flight. The battery needs to be charged before the quadcopter is stored. FPV Version Only 1.
USING THE DRONEVIEW APP The DroneView app is free software for your WiFi-capable Apple or Android device that allows you to connect to the DroneView camera to use the FPV (First Person View) function as well as to take videos and pictures and upload and view them directly to your device. 1. Install the “DroneView” app from Google Play (Android) or the App Store (Apple).' 2. Insert the memory card into the camera and connect a charged LiPo battery to the Dromida XL. 3.
When you have confirmed that the files ha ve been successfully transferred to your device’s camera roll, press Select and choose the files you wish to delete if you no longer want them in the file gallery. PROBLEM: Red controller LED light flashing after linking. SOLUTION: Replace with new AAA batteries. PROBLEM: Unable to flip. SOLUTION: Battery voltage too low. PROBLEM: Stabilization not working properly. SOLUTION: (1) Battery voltage low. (2) Re-link. (3) Recalibrate the sensors.
BLADE REPLACEMENT MOTOR REPLACEMENT 1. Remove the screw that secures the rotor blade to the gear shaft. 1. Remove the four screws from the black motor cover and lift it off the frame (if installed, the prop guard will also need to be removed before the motor cover can be removed). 2. Pull the prop off the gear shaft. 3. Install the new rotor blade and secure it with the screw. 2. D i s c o n n e c t t h e m o t o r connector.
4. There are four screws holding each motor cover to the frame. Remove all four motor covers from the frame. The motors should come out with the covers. Disconnect the motors and set the covers aside. We recommend labelling each cover so they are installed back in the correct locations. BATTERY PRECAUTIONS The Dromida XL uses a lithium polymer (LiPo) battery. Follow these precautions to ensure safe and trouble-free operation. • ALWAYS disconnect the battery from the quadcopter when not in use.
0-DAY LIMITED WARRANTY DECLARATION OF CONFORMITY: PLEASE DO NOT RETURN YOUR PRODUCT TO THE STORE. Dromida will repair or replace factory defects for 90 days from the date of purchase. This warranty specifically does not cover crash damage, misuse or abuse. To make a warranty claim, please contact our product support team at 1-217-3988970 option 6 or e-mail us at helihotline@greatplanes.com. If requested by Product Support, please send defective product to: Product: Dromida 2.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: DTXP4225 Duratrax Onyx 225 AC/DC Advanced Charger ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
EXPLODE VIEW 1 2 2 3 11 12 5 6 17 4 10 7 8 13 18 9 20 14 19 10 22 15 16 11
TO PREVENT MOTOR DAMAGE ALWAYS BE SURE THE THROTTLE IS OFF WHEN THE BLADES ARE OBSTRUCTED OR CONTROL IS LOST. PRESS AND HOLD THE MOTOR OFF PANIC BUTTON! © 2017 Dromida, a Hobbico® company dromida.
