Owner's Manual

Connecting DBUS1 to a Mobile Device
The default SSID (Wi-Fi name) is like DBUS1-XXXXXX. Click to connect
this SSID, and input the default password: dronesbyus. You can change
them in “App Settings”. Check that the drone is connected to Wi-Fi, that
its battery level is full, and that the optic flow positioning and the GPS
positioning status are normal. If so, it’s ready to fly.
Please fly especially carefully as you learn the drone’s flight controls. Pay
strict attention to flight direction, speed, and altitude. Watch for any
objects that may conflict with your flight path. Follow regulations in your
area for drone flight. Start with low speeds, altitudes and near distances
until you are totally comfortable with flying.
• When flying, keep your DBUS1 in your line of sight. Please ensure you
keep DBUS1 a good distance away from people.
• Take extra care not to run into people or objects during indoor flight.
Take-off / Landing
Take-off
Tap to take-off. DBUS1 will lift off and ascend to 1.5 meters
(1 m indoors).
Landing
Tap to land. The drone will descend and land.
23