User Manual

9711-26020-0001
Export Controlled – See Page 3
Rev D
SECTION 8
ARMOR X10gx Tablet Computer
SECTION 9
BATTERY MANAGEMENT
Page 215 of 234
ARMOR X10gx Tablet Computer
STEP ACTION COMMENTS
3.
Select #1 Only, #2 Only or Both NOTE: If only one battery is installed,
selecting that battery will cause the
START CYCLE option to appear in dark
text; if you select the missing battery or
BOTH, the START CYCLE option will
appear in grayed out text.
4.
Select START CYCLE.
An alert window will appear as shown in
Figure 123.
NOTE: To reduce internal heating during
the conditioning cycle, DRS recommends
you turn down the backlight (brightness)
level as much as practical.
NOTE: If the internal battery temperature
drops below 0°C or exceeds 45°C, the
computer will abort the conditioning
process.
5.
Click on Yes to proceed or No to
cancel the conditioning.
The first charge cycle will begin.
6.
To terminate the conditioning process
at any time, click on Terminate Cycle.
Figure 123. Battery Conditioning Start Alert Message