User Manual

9711-26020-0001
Export Controlled – See Page 3
Rev D
SECTION 2
GETTING TO KNOW YOUR ARMOR X10GX
Page 27 of 234
ARMOR X10gx Tablet Computer
The X10gx display is a high-brightness, high-contrast LCD display with anti-glare filtering that
ensures your screen can be clearly viewed even in bright sunlight. A replaceable screen
protector is attached at the factory to reduce glare and protect the touch screen surface.
Display
The X10gx comes equipped with a dual display that has both an active pen (digitizer) screen
and a touch screen as standard; an optional pen-only version is also available. The pen digitizer
screen permits precise data entry and accurate handwriting conversion while the touch screen
provides quick and accurate operation using just a fingertip. A passive stylus (not supplied) will
provide even more precision with the touch screen. If you have the standard display, you can
choose to operate with both screens (Dual Mode) or with only one screen (Touch Only or Pen
Only). Both screens have the same clear, crisp viewing quality in any lighting situation.
In Dual Mode, the touch screen is normally enabled and the pen screen is disabled. When the
active pen is detected within about ¼ inch of the screen, the touch screen is disabled and the
pen screen is enabled. When the active pen is moved away from the screen, the pen screen is
disabled and the touch screen is enabled. Switching between the two screens is automatic and
instantaneous.
There are 6 buttons and a fingerprint sensor located on the control panel on the right side of the
X10gx display, as shown in
Controls
Figure 2.
Figure 2. X10gx Control Panel
FINGERPRINT
SENSOR
WINDOWS SECURITY
KEY BUTTON
POWER
BUTTON
FUNCTION
BUTTON
PROGRAMMABLE
BUTTON P1
PROGRAMMABLE
BUTTON P2
PROGRAMMABLE
BUTTON P3