User Manual
Table Of Contents
- WARNING SUMMARY
- 1. WELCOME AND INTRODUCTION
- 2. GETTING TO KNOW YOUR ARMOR X7
- Processor and Operating System
- Data Storage
- Dual Screen Display
- Video Graphics
- Wireless
- Optional GPS Capability
- Audio
- Batteries
- ARMOR Flexspace™
- ARMOR X7 Specifications
- Front Panel Features
- Rear Panel Features
- Bottom Panel Features
- Included Components, Accessories and Support
- Optional Accessories for Your X7
- 3. GETTING STARTED
- Installing and Charging the Batteries
- Turning On Your X7 for the First Time
- Turning the Computer On Normally
- Putting the Computer in Sleep Mode
- Turning the Computer Off Normally
- Emergency Shutdown
- Indicator State Summary
- Activating your Wireless Radios
- Installing a Micro SD or SDHC Card
- Accessing and Using the GPS Receiver
- Operating the X7 Display
- Working with the Pen Screen
- Working with the Touch Screen
- Entering Data Using the Input Panel
- Using the FPS as a Simple Mouse Device
- Configuring Your Speakers
- Operating with the ARMOR X7 Vehicle Dock
- Using the Webcam
- Using the Screen Magnifier
- Tips for Proper Use and Care Of Your X7
- 4. NETWORKING
- 5. YOUR ARMOR X7 SOFTWARE
- Getting Started with Windows 7
- ARMORutils Program
- ARMORutils Main Dialog Window
- Backlight Setup Dialog Window
- Wireless Devices Dialog Window
- Programmable Button Settings Dialog
- Configuration Dialog Window
- Battery Monitor Dialog Window
- Screen Mode Setup Dialog Window
- Diagnostics Dialog Window
- ARMORutils About Window
- Pen and Touch Utility
- Tablet PC Settings Utility
- Pen Tablet Properties Utility
- Picasa 3®
- Virtual Magnifying Glass™
- 6. TROUBLESHOOTING
- 7. BACKUP AND RESTORE PROCEDURES
- 8. MAINTAINING YOUR ARMOR X7
- 9. DISPLAY MANAGEMENT
- 10. BATTERY MANAGEMENT
- Safety and Handling Considerations for Your Batteries
- When to Charge a Battery
- How to Charge Your Batteries
- How to Tell When Batteries Have Finished Charging
- Battery Operating Time
- Operating under Low Battery Conditions
- Battery Capacity
- Discharge/Recharge Cycles
- Battery Conditioning
- How to Optimize Battery Operating Time
- How to Monitor Battery Usage
- When to Replace a Battery
- Battery Warranty
- Where to Purchase Replacement Batteries
- How to Store Batteries When Not in Use
- Battery Tips for Best Performance
- Disposing Of Your Batteries
- 11. DRS TECHNICAL SUPPORT
SECTION 5 YOUR ARMOR X7 SOFTWARE PAGE 94
9711-26400-0001
EXPORT CONTROLLED – SEE PAGE 3
Rev -
Dock RF MUX Options
These options allow you to select which external antennas will be used by the X7. You can
select GPS only, WWAN only, or both antennas. If only one external antenna is selected, the
other radio will operate on its internal antenna. The initial default option is “Both”.Save Settings
Button.
Regardless of how you configure your radios and the Dock RF Switch during your session, they
will return to their default settings the next time you restart the computer unless you save your
settings using the Save Settings button.
Once you configure each radio and the RF switch to suit the way you normally use them (ON or
OFF), you can press the Save Settings button to save the current configuration as your new
default settings.
Save Settings Button
Regardless of how you configure your radios and the Dock RF Switch during your session, they
will return to their default settings the next time you restart the computer unless you save your
settings using the Save Settings button.
Once you configure each radio and the RF switch to suit the way you normally use them (ON or
OFF), you can press the Save Settings button to save the current configuration as your new
default settings.
Radios ON/OFF Toggle Button
Click on the Radios ON/OFF button to turn off or turn on all radios currently enabled. This is
particularly handy if you’re on a commercial aircraft and you want to continue working with the
computer without interfering with the aircraft electronic systems.
When you arrive at your destination, just click on the All Radios ON/OFF button again to turn
on the radios you previously had enabled.