User's Manual

SECTION 8 DISPLAY MANAGEMENT PAGE 156
9711-26020-0001
Export Controlled – See Page 3
Rev B
Automatic Adjustment
Open the Backlight Setup dialog in ARMORUtils and click on the Automatic button. The
backlight level will now be controlled by the ALS. If the surrounding light decreases, the
brightness will also decreases proportionally; if the surrounding light increases, the brightness
will increase.
NOTE
You must keep the ALS uncovered to allow proper automatic
brightness adjustment.
Automatic Mode Profiles
Select one of the profiles that best controls the range of backlight levels to suit your work
environment.