User's Manual

SECTION 8 DISPLAY MANAGEMENT PAGE 158
9711-26020-0001
Export Controlled – See Page 3
Rev B
2.
If you have a second pen or touch
screen display connected, be sure the
display you want to calibrate is
selected in the Display field.
3.
If you are not
having problems with
screen calibration and want to do a
quick 4-
point calibration, click on the
Calibrate button.
Otherwise, go to Step 5.
The
Calibrate Pen or Touch Input
Screens window opens, as shown below:
4.
Choose the type of screen to calibrate
and follow the on-screen instructions.
NOTE
If you do not have an external keyboard
connected, you can invoke the ESC
command using the Input Panel virtual
keyboard. Hover with the pen or tap on
the screen in the upper left corner near
the left edge. The keyboard will appear.
5.
If you are having screen calibration
problems or want to do a precision 16-
point calibration, lick on the Reset
button
The Reset Pen or Touch Input Screens
window opens, as shown below:
6.
Select the screen calibration you want
to reset.
The current screen calibration points are
reset to their default values and the
selection screen closes.