User manual

Tamarisk
®
320
Software ICD
27
3.1.6 Video Orientation Select 0xCF
Description: Selects the video display output mode
Command Format:
Table 37 – Video Orientation Select Command Format
Byte Value Description
1 0x01 Start of message.
2 0xCF Digital Video Source Select Command ID.
3 0x02 Parameters length.
4, 5 0 to 3
Video Orientation Selection
0 = Normal Orientation
1 = Vertical Invert
2 = Horizontal Invert
3 = Horizontal and Vertical Invert
Table 38 – Video Orientation Select Response Format
Byte Value Description
1 0x01 Start of message.
2 0x02 ACK Response
3 0x02 Parameters length.
4, 5 0x00CF Video Orientation Source Select Command ID.
6 Checksum Frame check sequence.
3.1.7 Digital Video Source Select – 0xD7
Description: Control the digital video output multiplexer. The camera default is to use the
output of the Symbology module.
Command Format:
Table 39 – Digital Video Source Select Command Format
Byte Value Description
1 0x01 Start of message.
2 0xD7 Digital Video Source Select Command ID.
3 0x02 Parameters length.
4, 5
Unsigned integer.
See table below.
Source ID value.
6 checksum Frame check sequence.