User manual

Tamarisk

320

Software ICD

3 0x02 Parameters length.

4, 5 0x00D2 AGC Gain Flatten Offset Set Command ID.

6 checksum Frame check sequence.

3.3.14 AGC Region of Interest – 0x84

Description: Sets or gets the AGC Region of Interest (ROI). This command also returns

the allowable ROI Limit. This command also provides ability to burn all of the ROI to flash

NV Param.

NOTE

This command has no effect if ICE is enabled.

Sub Command Format:

Table 93 – AGC Region of Interest Sub Command Table

ID Description Additional Parameters Response

0 Get ROI None Text String, ACK

1 Get ROI Limit None Text String, ACK

2 Set ROI 4 unsigned integer ACK

3 Burn ROI to NV

Param

None ACK

All other values reserved.

Command Format (sub-command 0x0000, Get):

Table 94 – AGC ROI Get Command Format

Byte Value Description

1 0x01 Start of message.

2 0x84 AGC ROI Get Command ID.

3 0x02 Parameters length.

4,5 0x0000 Sub-command Get ROI.

6 checksum Frame check sequence.

Response Format:

Table 95 – AGC ROI Command ACK Response Format

Byte Value Description

1 0x01 Start of message.