User manual

Tamarisk
®
320
Software ICD
51
2 0x02 ACK Response
3 0x02 Parameters length.
4, 5 0x84 AGC ROI Get Limit Command ID.
6 checksum Frame check sequence.
Command Format (sub-command 0x0002, Set):
Table 100 – AGC ROI Set Command Format
Byte Value Description
1 0x01 Start of message.
2 0x84 AGC ROI Set Command ID.
3 0x0A Parameters length.
4, 5 0x0002 Sub-command Set ROI.
6, 7 Unsigned integer XSTART, within valid limits (see Get Limit)
8, 9 Unsigned integer YSTART, within valid limits (see Get Limit)
10, 11 Unsigned integer XSTOP, within valid limits (see Get Limit)
12, 13 Unsigned integer YSTOP, within valid limits (see Get Limit)
14 checksum Frame check sequence.
Response Format:
Table 101 – AGC ROI Set Command ACK Response Format
Byte Value Description
1 0x01 Start of message.
2 0x02 ACK Response
3 0x02 Parameters length.
4, 5 0x84 AGC ROI Set Command ID.
6 checksum Frame check sequence.
Command Format (sub-command 0x0003, Burn to NV Param):
Table 102 – AGC ROI Burn to NV Params Command Format
Byte Value Description
1 0x01 Start of message.
2 0x84 AGC ROI Burn to NV Params Command ID.
3 0x02 Parameters length.
4, 5 0x0003 Sub-command Burn ROI to NV Param.
6 checksum Frame check sequence.