User manual

Tamarisk
®
320
Software ICD
76
1. 0x01 0x18 0x02 0x00 0x01 0xE4, to disable Tcomp.
2. 0x01 0xAC 0x00 0x53, to disable Autocal.
3. 0x01 0xF4 0x02 0x80 0x0 0x89, to enable horizontal ramp (for example) test pattern.
4. (optional) Please see Table 40 if 14-bit test patterns are desired. Otherwise, test
pattern will be 8-bit.
When test pattern is no longer used, it is best to power cycle the camera to restore to
normal operation.
Command Format:
Table 145 – Test Pattern Select Command Format
Byte Value Description
1 0x01 Start of message.
2 0xF4 Test Pattern Select Command ID.
3 0x02 Parameters length.
4, 5
unsigned integer
See table below.
Test Pattern ID.
6 checksum Frame check sequence.
Table 146 – Test Pattern IDs
Test Pattern ID Description
Test Pattern
ID
Description
Test Pattern
ID
Description
0x0000 Off 0x8003 Horizontal Bars 0x8007 Gray
0x8000 Horizontal Ramp 0x8004 Vertical Bars 0x8008 NUC 14-bit
0x8001 Vertical Ramp 0x8005 Black 0x8009 NUC 64 shade
0x8002 Diagonal Ramp 0x8006 White
Response Format:
Table 147 – Test Pattern Select Response Format
Byte Value Description
1 0x01 Start of message.
2 0x02 ACK Response
3 0x02 Parameters length.
4, 5 0x00F4 Test Pattern Select Command ID.
6 checksum Frame check sequence.