Data Sheet

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 542610_542615_11.07.2022
Double Tom Stand High
Double Tom Stand Low
EN
For the transport and protective packaging, environmentally friendly
materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of. Do
not just dispose of these materials with your normal household waste,
but make sure that they are collected for recycling. Please follow the
notes and markings on the packaging.
 Tom stand with two brackets
 Double-braced
 Single-stage extendable
 Ball joint
 Memory lock
 Three mounting options
 Additional receptacle for a cymbal arm
 Height: 75 cm - 110 cm (item no. 542615)
65 cm - 100 cm (item no. 542615)
 Chrome-plated
 Weight: 4.4 kg
Ensure that plastic bags, packaging, etc. are disposed of properly and
are not within reach of babies and young children. Choking hazard!
The plasticiser contained in the rubber feet of this product may
possibly react with the coating of your surface and after some time
cause permanent dark stains. In case of doubt, do not put the rubber
feet directly on the surface and use a suitable underlay if necessary, i.e.
felt-pad oor protectors or similar.
Mounting
The three legs of the tom stand must be unfolded, lowered and locked with
the wing nut.
Loosen the wing nut at the extension tube. Now you can pull out the extension
tube to the desired height. The height depends on the seat height of the
drummer. For xing the position, tighten the wing nut at the extension tube.
The toms are put on the brackets. Adjust the position of the toms via the ball
joints. To x this position, tighten the wing nuts on the ball joints.