Assembly instructions
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Note
- 3 Unpacking
- 4 Setting up the bass drum
- 5 Assembling the floor tom
- 6 Assembling the bass drum pedal
- 7 Assembling the hi-hat
- 8 Assembling the cymbal stands
- 9 Assembling the snare drum stand
- 10 Tuning the shells
- 11 Setting up the drum set
- 12 Attaching the cymbals
- 13 Protecting the environment
12 Attaching the cymbals
Our drum set is starting to take shape. We've already found the position of the hi-hat
stand. What's missing now is attaching the hi-hat cymbals and adjusting the height.
No cymbals are included in these sets.
First place a metal washer and the felt disk on the hi-hat stand. Then the bottom
cymbal (labelled "bottom"). Lie it freely onto the stand's felt disk.
We have to make some preparations for the top cymbal (labelled "top"). The top
cymbal is tted with a hi-hat clutch. To do this, turn the holder upside down and lay
it in the palm of your hand. Now put on a felt disk, the top cymbal (with the dome
downwards), another felt disk, a washer and the screw connection.
Now push the top cymbal over the pull rod such that it lies loosely on the bottom
hat.
Now adjust the height of the stand such that the bottom of the hi-hat cymbal is
about the width of your hand above the snare drum's hoop.
Attaching the hi-hat cymbals
Attaching the cymbals
DrumCraft Series
21
drum set