Assembly instructions
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Note
- 3 Unpacking
- 4 Setting up the bass drum
- 5 Assembling the floor tom
- 6 Assembling the bass drum pedal
- 7 Assembling the hi-hat
- 8 Assembling the cymbal stands
- 9 Assembling the snare drum stand
- 10 Tuning the shells
- 11 Setting up the drum set
- 12 Attaching the cymbals
- 13 Protecting the environment
Now tread the hi-hat pedal half way down and tighten the wing screw of the hi-hat
clutch.
The ride cymbal is placed on the right between the oor tom and the right-hand
hanging tom. As with the hi-hat, you screw the cymbal between two felt washers.
Now position the cymbal such that you can comfortably reach it with your drumstick
it doesn't hit the shell.
Now all the parts are in place and you can start to play.
Have lots of fun with your new drum set.
Attaching the ride and crash cymbals
Attaching the cymbals
22
DrumCraft Series
drum set